Home > BRAKE LINES > ROAD RACING specific brake line kits >

CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T-E, 4 Lines)
CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T-E, 4 Lines)
 
Price: $191.00



Availability:: Usually Ships in 3 to 5 Days
Product Code: 3T-ECUSTOM

BRAKE LINE COLOR


BANJO / FITTING COLOR


LOGO TAG COLOR


L1 LENGTH


L2 LENGTH


L3 LENGTH


L4 LENGTH (BRIDGE LINE)


L1 BEND ANGLE


L2 BEND ANGLE


L3 BEND ANGLE


BANJO BOLT KIT



Qty:  
Description
 
Use the images below to choose the options needed for your race set up.

The 3T-E front line set up was first used by Core Moto on Moto America Superbikes for a cleaner routing by creating a bridge line between the left and right caliper lines. This allows the left and right lines to be equal length and keeps the assembly from hanging below the lower triple clamp.

Core Moto 3T-E systems are intended to route as described below.

L1: From the master cylinder to the front of the right fork tube. Straight down the fork tube to the T fitting at the area where the lower triple clamps to the right fork leg.

L2: Straight down from the T fitting, around the OUTSIDE of the right fork, back to the right caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

L3: Straight down from the 90 Degree ELBOW fitting, around the OUTSIDE of the Left fork, back to the Left caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

L4: The Bridge line spans between the T and Elbow fitting. Typically the "T & E" fittings will rest in front of the right and left forks respectively. This kit works best when left side of the bridge line is mounted directly to the left side of the triple clamp. this can be done with zip ties or drilling and tapping the clamp to mount a P clip.

When measuring to fit your bike, we suggest using coaxial cable or something of similar rigidity as it will best replicate a stainless braided brake hose. Use zip ties to hold the coaxial cable in place anywhere you will mount the brake line while dry measuring your bike.

For customer ease, we will assume measurements are to end fitting tips...not centers.

Take your time and keep reworking your measure until you have it dialed in. We can not make lines longer if they are too short.
We do not accept returns on brake lines.

If ordering through our online builder, your data will remain on file if you wish to order again.







Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

BRAKE LINES > ROAD RACING specific brake line kits
BRAKE LINES
BRAKE LINES > CUSTOM BUILT lines to your measurements


Front brake line kit YAMAHA YZ125 YZ250 1999-2002 YZ250F 2001-2002 YZ450F 2000-2002 custom colors (1 Line) $89.00
Front brake line kit APRILIA PEGASO 125 1992-1995 custom colors (1 Line) $89.00
Front and Rear brake line kit KAWASAKI KLX250SF SUPER MOTO 2009-2010 custom colors (2 Lines) $159.00
Mx Core Moto front brake line kit fits YAMAHA WR250F 2015-2016 WR450F 2012-2015 custom colors (1 Line) $89.00
Honda CBR1000RR NON-ABS 2008-2015 Front and Rear brake line kit $251.00
Front and Rear brake line kit HONDA CRF250F 2019-2020 custom colors (2 Lines) $159.00
Mx Core Moto front and rear brake line kit fits KAWASAKI KX85 2014-2019 custom colors (2 Lines) $159.00
HONDA CB900F (919) HORNET 1999-2007 front brake line kit (2 lines) $148.00
Front and Rear brake line kit HUSQVARNA FS450 SUPERMOTO 2015-2020 (2 Lines) $159.00