Home > BRAKE LINES > ROAD RACING specific brake line kits >

CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T, 3 Lines)
CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T, 3 Lines)
 
Price: $171.00



Availability:: Usually Ships in 3 to 5 Days
Product Code: 3TCUSTOM

BRAKE LINE COLOR


BANJO / FITTING COLOR


LOGO TAG COLOR


L1 LENGTH


L2 LENGTH


L3 LENGTH


L1 BEND ANGLE


L2 BEND ANGLE


L3 BEND ANGLE


BANJO BOLT KIT



Qty:  
Description
 
Use the images below to choose the options needed for your race set up.
Core Moto 3T systems are intended to route on a race bike as described below. Your set up may be different. It is up to you to ensure all measurements are correct for your application.

L1: From the master cylinder to the front of the right fork tube. Straight down the tube between the upper and lower triple clamps. The T fitting should rest in front of the Lower triple clamp directly in the in front of the fork tube.

L2: Straight down from the T fitting, around the OUTSIDE of the right fork, back to the right caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

L3: Straight across the front of the Lower triple to the left fork leg. This line should start dropping down after passing the centerline of the bike, then go around the OUTSIDE of the Left fork, back to the left caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

When measuring to fit your bike, we suggest using coaxial cable or something of similar rigidity as it will best replicate a stainless braided brake hose. Use zip ties to hold the coaxial cable in place anywhere you will mount the brake line while dry measuring your bike.

For customer ease, we will assume measurements are to end of banjo fittings...not centers.
Measurements to the T fitting are to center of T.

Take your time and keep reworking your measure until you have it dialed in. We can not make lines longer if they are too short.
We do not accept returns on brake lines.

If ordering through our online builder, your data will remain on file if you wish to order again.

We do not share application Data. You must measure your own custom set up.

We have many popular race bikes pre measured and available to order here.
3T RACING FRONT BRAKE SYSTEM (CHOOSE BIKE) (coremoto.com)







Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

BRAKE LINES > ROAD RACING specific brake line kits
BRAKE LINES
BRAKE LINES > CUSTOM BUILT lines to your measurements


SUZUKI GSX1300R HAYABUSA ABS 2022+ Single Front Master Cylinder line kit (1 Line) $88.00
KAWASAKI EX650R 2009-2011 front brake line kit (2 lines) $148.00
Suzuki GSX1300R HAYABUSA ABS 2013-2021 Front and Rear brake line kit (5 lines) $425.00
Front and Rear brake line kit HONDA CRF150RB 2007-2020 Big Wheel carbon look (2 Lines) $159.00
Front brake line kit YAMAHA WR250X 2012-2016 (EU ONLY) SUPERMOTO custom colors (1 Line) $89.00
Kawasaki Z1000 2007-2009 Front and Rear brake line kit $251.00
Front and Rear brake line kit KTM 150 XC 250 XC 300 XC 2012 250 XC-F 2011 350 XC-F 2011-2012 stainless steel (2 Lines) $159.00
Satin Gold Apex-6 Aprilia RSV4 / Factory / APRC / Tuono 2013-2026 Forged Core Moto wheels $2,814.00
YAMAHA R6S 2003-2004 Front and Rear brake line kit (3 Lines) $189.00