Home > BRAKE LINES > ROAD RACING specific brake line kits >

CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T, 3 Lines)
CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T, 3 Lines)
 
Price: $171.00



Availability:: Usually Ships in 3 to 5 Days
Product Code: 3TCUSTOM

BRAKE LINE COLOR


BANJO / FITTING COLOR


LOGO TAG COLOR


L1 LENGTH


L2 LENGTH


L3 LENGTH


L1 BEND ANGLE


L2 BEND ANGLE


L3 BEND ANGLE


BANJO BOLT KIT



Qty:  
Description
 
Use the images below to choose the options needed for your race set up.
Core Moto 3T systems are intended to route on a race bike as described below. Your set up may be different. It is up to you to ensure all measurements are correct for your application.

L1: From the master cylinder to the front of the right fork tube. Straight down the tube between the upper and lower triple clamps. The T fitting should rest in front of the Lower triple clamp directly in the in front of the fork tube.

L2: Straight down from the T fitting, around the OUTSIDE of the right fork, back to the right caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

L3: Straight across the front of the Lower triple to the left fork leg. This line should start dropping down after passing the centerline of the bike, then go around the OUTSIDE of the Left fork, back to the left caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

When measuring to fit your bike, we suggest using coaxial cable or something of similar rigidity as it will best replicate a stainless braided brake hose. Use zip ties to hold the coaxial cable in place anywhere you will mount the brake line while dry measuring your bike.

For customer ease, we will assume measurements are to end of banjo fittings...not centers.
Measurements to the T fitting are to center of T.

Take your time and keep reworking your measure until you have it dialed in. We can not make lines longer if they are too short.
We do not accept returns on brake lines.

If ordering through our online builder, your data will remain on file if you wish to order again.

We do not share application Data. You must measure your own custom set up.

We have many popular race bikes pre measured and available to order here.
3T RACING FRONT BRAKE SYSTEM (CHOOSE BIKE) (coremoto.com)







Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

BRAKE LINES > ROAD RACING specific brake line kits
BRAKE LINES
BRAKE LINES > CUSTOM BUILT lines to your measurements


Front and Rear brake line kit KAWASAKI KX125 KX250 2003 stainless steel (2 Lines) $159.00
KAWASAKI ZX9R 2000-2001 front brake line kit (2 lines) $148.00
Front brake line kit SUZUKI RM-Z250 2007-2018 RM-Z450 2005-2017 custom colors (1 Line) $89.00
Suzuki GSXR600 GSXR750 2011-2024 Front and Rear brake line kit $251.00
Core Moto USA Stainless Steel Race Spec Bolt (Single Length) $10.50
KAWASAKI ZX14R NON-ABS 2012-2014 / ZZR1400 NON-ABS 2012-2015 Front brake line kit (2 Lines) $148.00
YAMAHA R6S 2003-2004 Front and Rear brake line kit (3 Lines) $189.00