Home > BRAKE LINES > ROAD RACING specific brake line kits >

CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T, 3 Lines)
CUSTOM BUILT FRONT BRAKE LINE RACING SYSTEM (3T, 3 Lines)
 
Price: $171.00



Availability:: Usually Ships in 3 to 5 Days
Product Code: 3TCUSTOM

BRAKE LINE COLOR


BANJO / FITTING COLOR


LOGO TAG COLOR


L1 LENGTH


L2 LENGTH


L3 LENGTH


L1 BEND ANGLE


L2 BEND ANGLE


L3 BEND ANGLE


BANJO BOLT KIT



Qty:  
Description
 
Use the images below to choose the options needed for your race set up.
Core Moto 3T systems are intended to route on a race bike as described below. Your set up may be different. It is up to you to ensure all measurements are correct for your application.

L1: From the master cylinder to the front of the right fork tube. Straight down the tube between the upper and lower triple clamps. The T fitting should rest in front of the Lower triple clamp directly in the in front of the fork tube.

L2: Straight down from the T fitting, around the OUTSIDE of the right fork, back to the right caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

L3: Straight across the front of the Lower triple to the left fork leg. This line should start dropping down after passing the centerline of the bike, then go around the OUTSIDE of the Left fork, back to the left caliper.
NOTE: This area is where you account for enough slack to make up for suspension travel, yet not so much it snags when suspension is fully compressed and/or steering turned lock to lock.

When measuring to fit your bike, we suggest using coaxial cable or something of similar rigidity as it will best replicate a stainless braided brake hose. Use zip ties to hold the coaxial cable in place anywhere you will mount the brake line while dry measuring your bike.

For customer ease, we will assume measurements are to end of banjo fittings...not centers.
Measurements to the T fitting are to center of T.

Take your time and keep reworking your measure until you have it dialed in. We can not make lines longer if they are too short.
We do not accept returns on brake lines.

If ordering through our online builder, your data will remain on file if you wish to order again.

We do not share application Data. You must measure your own custom set up.

We have many popular race bikes pre measured and available to order here.
3T RACING FRONT BRAKE SYSTEM (CHOOSE BIKE) (coremoto.com)







Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

BRAKE LINES > ROAD RACING specific brake line kits
BRAKE LINES
BRAKE LINES > CUSTOM BUILT lines to your measurements


KAWASAKI ZX6R 1995-1997 front brake line kit (2 lines) $148.00
Mx core moto clutch line kit fits HUSQVARNA TC125 2014-2015 TC250 2014-2016 TE125 2014-2016 OEM MAGURA (1 Line) $77.00
Mx core moto front brake line kit fits HONDA CRF 150F 2020 custom colors (1 Line) $89.00
SUZUKI GSXR750 1996-1999 Front and Rear brake line kit (3 Lines) $189.00
Front and Rear brake line kit HONDA CRF250X 2004-2017 CRF450X 2005-2017 stainless steel (2 Lines) $159.00
Front and Rear brake line kit YAMAHA YZ125 YZ250 1999-2002 YZ250F 2001-2002 YZ450F 2000-2002 carbon look (2 Lines) $159.00
Front brake line kit HUSQVARNA TC125 TC250 FC250 FC350 FC450 2014-2020 - FX350 FX450 TX300 2017 (1 Line) $89.00
Front brake line kit KTM 125 SX 2000-2003 200 SX 2003 250 SX 2000-2002 400 SX-F 2000-2002 520 SX-F 2000-2002 525 SX-F 2003 custom colors (1 Line) $89.00
Front brake line kit KAWASAKI KX250F KX450F 2006-2011 custom colors (1 Line) $89.00