 |
 |
 |
|
World Wide Bearings Ceramic Hybrid Wheel Bearings
Product is sold as a single bearing. Increase quantity if multiple units of same PN is required.
- Hybrid ceramic design
- 40% Less friction than steel bearings
- 60% Less rotational mass than steel bearings
- Lower vibration levels
- Cooler running temperature
- Recommended for professionally maintained race bikes only
- No warranty, non-returnable or exchangeable
- Sold each
World Wide Bearings are sold by Core Moto as an aftermarket, non-OEM equipment bearing option for Core Moto Wheels. World Wide Bearings can be installed in new wheels purchased from Core Moto for an additional upcharge. Core Moto recommends only using ceramic bearings on professionally maintained closed-course race specific bikes. No warranty is offered on this product. Due to the availability of counterfeit bearings, this is a non-returnable / non-exchangeable item. All sales are final. Bearings are sold each.
THERE ARE 2 WAYS TO DETERMINE WHAT BEARINGS ARE NEEDED FOR YOUR WHEELS:
1: Read the numbers on the seals of your current bearings:
- Typically, these numbers are 4 digits and start with the number 6 (Example: 6006). Your
Bearing may have other letters following the 4-digit number such as 2RS
or RSR. No matter what letters follow the 4-digit number, our bearings
will be a direct replacement so long as the 4-digit number is the same.
2: Pull the bearings and provide measurements of the OD, ID and thickness in millimeters rounded to the whole metric number:
- 6006 = OD 55mm - ID 30mm - T13
- 6205 = OD 52mm - ID 25mm - T15
- 60/28 = OD 52mm - ID 28mm - T12
Bearings required for all Apex-6 wheel applications produced (except for Aprilia RSV4/Tuono applications):
- Rear wheel: 3 units bearing # 6006
- Front wheel: 2 unit bearing # 6205
Bearings required for Apex-6 applications produced for Aprilia RSV4/Tuono models:
- Rear wheel: 3 units bearing # 6006
- Front wheel: 1 unit bearing # 6205 + 1 unit bearing # 60/28
IMPORTANT NOTE: Carrozzeria USA INC went out of business in October 2015, Core Moto USA took over in 2016. However, due to the lack of historical technical data provided to us related to wheel dimensional changes before 2016, Core Moto USA cannot offer bearings based on make / model and year for pre-2016 wheels. Carrozzeria USA INC made many different model versions of each wheel, all with dimensional differences that drive the dimensions of the components used. Please read above on how to determine what bearings you will need for your older wheels. Returns are not accepted on this item. Wheels produced in 2016 are supported but may require contact with customer support. Wheels produced after 2017 typically came with full diagrams showing and part numbering all replacement parts.
|
|
|
 |
|
 |
|
